Friday, October 14, 2011

Repairing a cracked nail, update

Well, Unfortunately I got a bad tear on the side of one thumbnail.  Unfortunately for me that is!  For you guys, LUCKY!  Because now I get to show you how to do the silk repair on a real nail!  :)

Here is my updated video.

Wednesday, October 5, 2011

Repairing a cracked nail

I often get asked how I repair a cracked or split nail.  I have a couple nails where I tend to get low splits on the sides near the quick.  For one, they can be painful if the nail tears all the way across.  Secondly, I never like having a shortie nail, so whenever possible I will repair the split with some silk and glue under my gel manicures until it grows out enough that I can either deal with the nail being a tad shorter or until it's filed off completely.

At the moment I don't have any splits or tears, So for the tutorial I did this on a sample nail with a line drawn to simulate a crack.  Next time I have a nail that splits and needs repairing I'll do one on my own nail and update this posting.

In addition to your usual gel manicure supplies, you need some brush on glue, silk or fiberglass nail wraps (I prefer the self-adhesive silk wraps), and very sharp small scissors or large nail clippers to cut the nail wrap.

Using very sharp scissors or the nail clippers, cut a small piece of the silk wrap.  Just a small rectangle enough to cover the split and a little bit around it.  If you don't have very sharp scissors, the edge of the nail wrap tends to fray and can leave your manicure not as smooth as it should be.

With the self adhesive nail wraps it's very easy to carefully place the piece of silk or fiber over the split, and smooth it down and into place with a dotting tool, cuticle push, orangewood stick or toothpick, whatever you have handy.  Make sure the silk or fiber goes right up to the very edge of the nail where the crack is.  You can even let it hang over just a tiny bit, as you can file it smooth later.

Apply a very thin layer of brush on nail glue over the silk and let it dry.  When it's dry, add another thin layer for additional strength.

When it's completely dry, take a fine buffer block (mine is a 240 grit I think) and gently buff over the repair to smooth it down.  Don't over buff it or you'll weaken your repair, just enough to smooth it.  You can use a nail file along the edge in a DOWNWARD MOTION ONLY to smooth the edge or side of the nail if you left any material hanging over.

Now continue on with your Gel manicure as usual!  Basecoat, color coats, and topcoat.  Voila!  All fixed!

If the split is very large, I will also add Gelish Structure Gel to my manicure in between the base coat and color coats.  Just a thin layer or two is all you need to add a bit more strength.  Even without adding the Structure, most of my split repairs last me a full two weeks.

Just remember, when you soak off your gel polish, the repair will soak off too.  Either you need to redo it each manicure or file off your color very gently instead.  I think it's much easier to just fix the crack again than to file off the color.

Check out the tutorial on YouTube!

Gel Manicure with Swirled tips

This is my current manicure:

I did a swirl/flame type design using different colors on the tips.  I used Gelish Ambiance for the base, and on the tips I used Orly Gel FX Rage and Artistic Colour Gloss Eccentric.  Of course you can use any colors you like, and you could swirl the design all over the nail instead of just on the tips (just skip the sheer base color and use your swirl colors only).  

This is really no more complicated than a plain gel mani, all you need is a dotting tool, toothpick or something similar to swirl the colors together.  

  1. Prep nails as usual, do cuticle work, etc.
  2. Apply Gel base coat, cap free edge and cure.
  3. Apply 2 coats Gelish Ambiance for base color - don't cure second coat yet
  4. Add ACG Eccentric on the tip - paint on like you would if you were going to do a french manicure
  5. Carefully dot on a few dots of Orly Rage
  6. Use Dotting tool to swirl the design, bring up "flames" if you want, etc.  Make it yours!  :-).  Cure
  7. Add Gel topcoat, cap free edge and cure 
  8. Wipe with alcohol to remove tacky layer
  9. Voila!  
Check out the Tutorial on YouTube!